Monthly Archives: November 2011

7 issues of common garage door

Posted on by
Reply

Garage doors are a must for any home. It is uniquely determined, protection, security and privacy, even in general. Therefore, a need for ongoing maintenance is very important. If we experience problems garage door, it’s not easy trying to find the cause and solution. But you’ll be able to patch it, if you understand how it works and how to fix it.
Here is a list of the most common garage door to fix it yourself, or perhaps requiring you to call for a service business is repair.
The first door is locked – can cause a cable break, damaged rolls of wire or the spring tension of the door is curved track. Make sure to first check the cables and pulleys and replace if necessary.
The second door can not close all the channels with the remote / operator – if so, check to see if it bends and springs worn tracks. To correct this, simply turn and damaged feathers.
The third creaking doors and generate noise – the causes are dry bearings, hinges or rollers. A thud bash says there is something wrong with your garage door opener. Again, check the springs and lubricate the rollers and bearings.
The fourth door jams – it is either at the door and disability on the track, or there is something wrong with the remote itself. Inspect and clean the debris and remove it. If this still does not work, check the remote, lubricate the chain, and if it still does not do the trick, to call for professional help.
The fifth is running unexpectedly in the wrong direction – this problem is a bit difficult because it involves different assumptions to the problem. It can be a sign of damaged or broken springs may need to extend the replacement pulleys, lubrication is needed, or a mishap with the sensors themselves to check everything if you do not see the problem, then it is contact time for repair.
6th The garage door opens to itself – its sure the remote control, it could be that there is someone controlling the door. If the remote is with you and you are unable to control, check the wiring. There may be some wiring problems. If the son is OK, try to reset or restore the settings. Read the manual before doing this. If all else fails, make a man attention.
7th The strike is not working with the remote – check if it is connected, and if the outlet works. Check your remote control you. See the instructions for configuring your manual with the remote / sensor and fix it.
We have no guarantee for garage doors worry free. At some point, you may encounter problems. However, it is for us as we extend them to preserve their life. If you are not able to solve problems, call the repair experts and let them take care of everything.

Dry-acoustical Mass Loaded Vinyl

Posted on by
Reply

When considering different soundproofing techniques, whether professional or new do-it-yourself upgrades, it is important to understand how to transmit sound through walls, to compare benefits. To determine which technique is more attractive, we will first explore how sound interacts with obstacles – such as walls – and to compare the noise performance of mass loaded vinyl, soundproof drywall.
Sound – that is, sound waves or vibrations – passes from one side of a barrier (wall) to the other through the fence to vibrate, which in turn vibrates the air, on the other side of the fence . Of course, the obstacles with more mass, like a wall of heavy metal to swing harder, and thus transfer less noise, lighter than the obstacles. This basic principle is what underlies the “mass-loading” for soundproofing, including mass loaded vinyl. In the case of mass loaded vinyl, vinyl sheets of heavy, weighing about one pound per square foot, are used to increase the mass of the wall by mounting between the bolt and the outer layer of drywall.
However, protection against noise goes beyond considerations of the mass. The latest in sound insulation is based on the viscoelastic damping. Viscoelastic materials, which due to their combination of viscous properties (such as peanut butter) and the elastic properties (like a rubber band) waste energy when they come into contact with sound waves. In other words, if the force of sound waves hit a layer of viscoelastic material, the material is deformed by vibration (because it is flexible like a rubber band), but is slowly returning to its original form (as s’ infiltrates as in peanut butter). During this expansion and contraction, an essential part of the sound wave energy into thermal energy or heat is transformed.
Constrained viscoelastic damping layer is a technique in which a thin layer embedded in a viscoelastic material, usually a polymer between two hard surfaces like drywall. By separating the two layers of plasterboard with viscoelastic material, an essential part of sound energy through the viscoelastic layer is reduced, and very little vibration is transmitted through the second layer of plasterboard, leading to losses high transmission. Drywall acoustical panels or sound attenuated used exactly this approach to obtain excellent results of the noise.
Mass loaded vinyl can provide excellent insulation performance, but the installation is labor intensive and combination of materials and labor cost, mass-loaded vinyl an unattractive option. Especially for do-it-yourself projects, the installation is responsible for the mass production of vinyl complex and error. Soundproof drywall scores on the other side snaps, and hangs like normal plaster. It is easy to install drywall suppliers and countries.
In addition, the sound has not the protecting power of 1 lb / square meter to measure vinyl, similar to a wall structure with soundproof drywall. A standard single stud, inner wall of 5 / 8 gypsum “on each side provides a sound transmission class (STC) of 34 Add a layer of mass loaded vinyl on one side of the wall can increase the STC to 43. But , produced using the same assembly with soundproof drywall on one side and STC 51.
Both in terms of noise performance and in terms of ease of installation, the lowest soundproofing drywall cheap and easy to get world-class sound.